StageDesigner

Nature of calculations and liability

StageDesigner is a tool for visualization and concept planning. Here is what that means for the values the app calculates and where the app shows disclaimers.

4 min read
Documentation contents ▾

StageDesigner is used for visualization and concept planning of events: visualizing stage design, placing equipment, preliminary lists and estimates. The app calculates many technical values, but it does not produce detailed designs and does not replace them.

What counts as an indicative value

All values shown in the app, including the browser version, reports, exports and responses from the MCP server and AI tools, are indicative estimates. This applies in particular to:

  • weights and power consumption of equipment,
  • structure loads and load capacities, support reactions, rigging points, wind effects and ballast,
  • cable cross-sections and lengths, voltage drops, circuit protection and phase balance,
  • DMX addressing and channel counts, signal line lengths,
  • LED screen parameters (power, weight, resolution, port load),
  • sound levels, SPL and STI maps, reverberation time, delays,
  • venue capacity, distances and evacuation routes.

Equipment data in the app describes device classes or approximate values. The specific model that ends up on stage may have different parameters.

What the app is not

Results from the app are not a detailed design, structural calculations, an electrical installation design, an acoustic assessment, or safety and fire protection documentation. Acoustic maps are a simulation and do not replace measurement on site. The capacity estimate and evacuation route check do not replace the decisions of the venue manager and a certified expert.

Duty to verify

Results must be checked at every stage of event preparation and production:

AreaWhere to checkWho verifies
Structures, rigging, hoists, wind and ballastmanufacturer load tables and manuals, venue documentationstructural engineer, rigger
Stages, decks, railings, stairsmanufacturer data sheets and manualsa qualified person, in line with the venue documentation
Power, cables, circuit protection, generatormanufacturer data sheetsa person with electrical qualifications (measurements, circuit protection, RCD)
DMX and networkmanufacturer manuals; test before the eventshow operator, technician
LED screensdata sheets from the module manufacturera qualified person (screen structure and power)
Sound system and acousticsprediction software and the system manufacturer’s data sheets; measurement on sitesound engineer; flown arrays: a qualified person
Capacity and evacuationvenue documentationcertified fire safety expert, venue manager

Decisions on the selection, installation and operation of structures, equipment and installations are made by the user and the production contractors based on verified documentation, not solely on the results from the app.

Where the app shows disclaimers

Panel and inspector footers
The note "Indicative values, verify against manufacturer data sheets." with an (i) icon that shows the full text for the given area. It appears in the Structures, Cabling (power, DMX, LED), Sound and acoustics, and Control room panels, in the equipment, fixture and screen inspectors, in the venue layout plan and in the wizards.
The ≈ sign
Marks an indicative value, e.g. for loads while you draw a structure and in the fixture inspector.
Project report
The title page starts with a "Limitation of liability" block, and every page has a footer with the disclaimer. The list of standards at the end of the report is for reference only; the report does not declare compliance with them.
Exports
The venue layout plan (SVG, PNG), the control room connection diagram, the DMX channel map and CSV lists carry a note about indicative values.
MCP server
Responses with calculations end with a disclaimer for the AI and the user.
Start screen and help
A short note on the nature of the app on the start screen and the full text in the Help and shortcuts panel.
Project reportCompany gala · version 14Lighting32 pcs1,152 kgSound18 pcs846 kgLED screens50 mod.520 kgStructures24 el.412 kgCables1,240 m-Power balance · 41.6 kW2 warnings to check
Project report: the "Limitation of liability" block on the title page and a footer with the disclaimer on every page.

The rules are set out in the Terms of Service in §5 (nature of the app), §6 (duty to verify) and §7 (liability), and in the End User License Agreement (EULA) in sections 4 and 5. This article is a summary; in case of any discrepancy, the legal documents prevail. Signing up through the /expo page also requires you to confirm that results are indicative and must be verified by qualified persons.

Did not find the answer?
Describe the problem and we will reply with a solution or add an article.