StageDesigner

Modeling solids: line, rectangle, circle and Push/Pull

The drawing tools work much like SketchUp: you draw flat shapes, pull them into solids and type exact dimensions from the keyboard. This article also covers the transform tools, including Rotate by Axis.

6 min read
Documentation contents ▾

Toolbar

The scene toolbar is at the bottom of the 3D view. The tools are in groups: Selection, Drawing, Solids, Transform and Measure. When the window is narrower, some of them move under the More Tools button. You can also pick each tool with a single key.

ToolKeyWhat it does
PointerSpace, VSelecting objects, selection box
LineLEdges on the floor and on faces of solids; a closed outline creates a face
RectangleRRectangular face
CircleCCircular face
Push / PullPPulls a flat face out into a solid or pushes it in
Split Faceno shortcutSplits a face of a solid into two parts with a line
MoveMMoves the selection with the gizmo handles
RotateQRotates the selection with the gizmo rings
Rotate by AxisORotates the selection around an axis you draw
ScaleS (also Z, K)Scales the selection with the axis handles or the center handle
Tape MeasureWMeasures a distance and leaves a dimension in the scene

In the drawing tools, the left mouse button operates the tool, while the right and middle buttons orbit and pan the camera. So you can rotate the view halfway through drawing and the shape you started stays in place.

Line

  1. Press L and click the start point on the floor or on a face of a solid.
  2. Click further points or type the segment length and press Enter. The cursor position sets the direction.
  3. Clicking the start point closes the outline and creates a face.
  4. Finish an open line with Enter or a double-click.

Open lines stay in the scene as edges. You can also close an outline in stages: when consecutive lines form a closed, flat loop, a face appears inside it. To draw a vertical line, guide the cursor along the blue Y axis or lock it with the ↑ arrow key (details in Snapping, Tape Measure and Dimensions).

Rectangle and circle

  1. Rectangle (R): click the first corner, then the opposite one. Instead of the second click, you can type the dimensions and press Enter.
  2. Circle (C): click the center, then a point on the circumference. Instead of the second click, you can type the radius and press Enter.

While you draw, live dimensions appear on the shape: the width and length of a rectangle or the radius of a circle. A badge next to the shape shows the drawing plane. A shape drawn in empty space lies on the floor, and a shape drawn on a face of a solid lies in the plane of that face and splits it (see Drawing on faces and editing solids).

To draw a vertical rectangle, e.g. a set wall, start from a corner on the floor: hover the cursor over a nearby point for a moment until its axes appear, then guide the second corner upward along the blue Y axis. The plane switches to vertical.

Typing dimensions from the keyboard

After the first click, you do not need to hit the dimension with the mouse. Just start typing: the value appears next to the cursor and Enter confirms it. Backspace deletes the last character, Esc clears the entry.

EntryMeaning
2.52.5 m (without a unit, the value is in meters; comma and period work the same)
250cm, 2500mmValue with a unit, converted to meters
4;2.5Rectangle 4 × 2.5 m (separator: semicolon, x or ×)
4x2Rectangle 4 × 2 m
2+0.5Arithmetic: addition, subtraction, multiplication and division, e.g. 1.2*4, 10/2
1.5For a circle: radius; for Push/Pull: distance; for a line: segment length

Push / Pull

  1. Press P and click a flat face.
  2. Drag the mouse to pull the face out into a solid or push it in.
  3. Type the exact distance from the keyboard and press Enter. Mouse movement sets the direction, the entry sets the distance.

During the operation the face pulses and a dimension line shows the distance: green when pulling, orange when pushing. If the pulled solid enters another solid, the two merge into one. This does not apply to locked solids, hidden solids and solids from a venue layout plan.

Move, Rotate and Scale

  • Move (M): drag an axis arrow of the gizmo or type the position in the bar at the top of the view. Shift during the move locks the dominant axis, ⌥/Alt makes a copy, Ctrl turns snapping off.
  • Rotate (Q): drag a rotation ring or type the angle in the bar at the top. Shift rotates in 45° steps.
  • Scale (S): drag an axis handle or the center handle (uniform scaling). Screens change their physical dimensions, while for solids the scale is written into the geometry.

You will find aligning and distributing objects under the Align button on the toolbar (it appears when something is selected) and in the Edit → Align and Distribute menu. Mirroring: Edit → Mirror.

Rotate by Axis

The regular Rotate spins an object around its own center. Rotate by Axis (O) rotates the selection around any axis drawn in the scene, e.g. the edge of a riser, a truss tube or the hinge of a set wing. Both the position of the objects and their orientation are rotated.

  1. Select the objects to rotate. With nothing selected, the status bar prompts you to select something first.
  2. Press O and pick the first point of the axis.
  3. Pick the second point of the axis.
  4. Pick the angle start point, i.e. the direction from which you measure the rotation (the zero arm of the protractor).
  5. Move the cursor to set the angle and click. You can also type the angle in degrees and press Enter.

The axis points and the start point snap to vertices, edges and the X/Y/Z axes, just like in the Line tool. The rotation preview is live: the scene shows the axis, the protractor, the zero arm and the angle arc, and the status bar shows the current step and the number of objects being rotated.

O
Rotate by Axis tool
Shift
Angle in 45° steps
⌥/Alt
Angle without rounding (1° steps by default)
number+Enter
Angle in degrees; a minus sign reverses the direction
Esc
Cancel and return objects to their position before the rotation
Did not find the answer?
Describe the problem and we will reply with a solution or add an article.