StageDesigner

The "Design sound system" wizard

The three wizard steps: event type, number of people, level and zone depth; a system proposal with reasoning (arrays, subs, front fill, out fill, delay towers, monitors, amplifiers, processor, mixer, stagebox, microphones); placement with angles and delays.

4 min read
Documentation contents ▾

The wizard proposes a complete system for the room, the number of people and the level. Each item has numbers and a short reasoning, and you can change everything before inserting and later in the inspector. The Insert sound system button works at every step.

SoundSystemDesign sound system…

Step 1: Event

Choose the event type. It sets the default target level and the character of the system.

TypeDescription in the wizardTarget level
ConferenceSpeech and videos, audience in rows85 dB(A)
GalaSpeech, dinner music and a concert, tables95 dB(A)
ConcertLive music, standing audience (max ≤ 100 dB(A) at the front)97 dB(A)
Trade fairBooth or trade fair zone, column speakers85 dB(A)
Number of people
When the project has a venue layout plan, the listening zone comes from the plan; otherwise it is estimated from the number of people.
Target level
LAeq in dB(A). Above 100 dB(A) the field shows a note about the audience exposure guideline.
Zone depth
From the stage front to the last row. An automatic value has a marker and a reset button.

Step 2: Proposal

A list of items with an in system switch, a model choice (when several classes are available), the number of elements per side or units, and an info icon with the reasoning.

ItemWhat it does
L/R arrays (or Main loudspeakers L/R, Column speakers L/R)Main system; the type depends on the event and the zone size
SubsSubwoofers at the stage
Front fillThe first rows in the center lie below the array axis; front fill restores the level and keeps the sound image on the stage
Out fill L/RThe sides of a wide audience area outside the array coverage
Delay towersWhen the zone is deeper than the reach of the main system; one or two rings
MonitorsFloor monitors on stage
AmplifiersChannels assigned by impedance; amplifiers close to the loudspeakers shorten the cables
System processorSeparate EQ, delays and levels per zone (arrays, subs, fill, delay)
FOH mixerSignal source for the processor and amplifiers
StageboxMicrophone inputs and monitor outputs on stage, to the mixer over one digital cable
Wireless microphonesFor hosts and speakers

Below the list, tiles show the totals: elements, mass, flown mass, channels (needed / available) and power. The most important wizard notes appear in info boxes.

How the wizard calculates the level

The wizard makes an indicative balance of the peak level at the last row: the maximum SPL of an element, the sum of the array elements, distance loss and air absorption per ISO 9613-1. It requires the level to cover the LAeq target, a 10 dB program peak margin and 3 dB of headroom. When the maximum LAeq at the front would exceed 100 dB(A) at the target, the wizard lowers the operating level and says so in a note.

Step 3: Placement

On the left, the Flying and angles group with each set: trim height, number of elements, tilt, angles between elements, delay and the label "on the truss" when the set hangs on a structure. On the right, a top view: the stage, the listening zone and the sets, with a line showing the axis of the arrays and delays.

Arrays go next to the stage or the screens, and when there is a truss they hang on it. The wizard places delay towers in the aisles, not in rows of chairs or on tables. The delay of a delay tower is the distance from the arrays divided by 343 m/s plus 7 ms (precedence effect), so the sound is still heard from the direction of the stage.

The Plan sound cabling and power switch (on by default) adds audio and power cable routes to the insert. The To insert row sums up the number of sets and devices.

Inserting

Insert sound system adds the sets, devices and cables in a single undo step, copies the operating level and ear height to the acoustics settings, and then opens the System tab. This way the acoustics map and the automatic angles are calculated for the same target as the proposal.

Did not find the answer?
Describe the problem and we will reply with a solution or add an article.