Adding an underlay
- Prepare the venue floor plan as an image (PNG, JPG, WebP; in the Venue Layout Plan also SVG).
- Hold Shift and drag the image file onto the 3D view. The hint "Shift: underlay (floor plan)" appears next to the cursor.
- Drop the file. The image lies flat on the floor at the drop point, 6 m wide with the proportions of the file. The underlay is selected and the inspector shows its settings.
You can also add an underlay in the Venue Layout Plan (⌘/Ctrl + 1): Underlay section, Load Image… button. It is the same project object, so changes in the plan show up in the 3D scene right away.
Scale calibration
The 6 m width after dropping is only a starting value. You set the real scale with a segment of known length, e.g. a venue wall with a dimension on the drawing or the width of a door.
- In the underlay inspector, in the
Scalesection, clickCalibrate scale with segment. - Click the start of a segment of known length. A hint appears at the top of the view.
- Click the other end of the segment. The length of the drawn segment is shown live.
- In the
Segment length (m)field, type the real dimension and press Enter orScale. The current length is shown below the field (Now:). - The underlay is scaled uniformly around its center.
Esc cancels calibration. To be sure, check the result with the Tape Measure (W) on another known dimension of the plan.
Inspector settings
- Position and rotation
- X and Z coordinates in centimeters and rotation around the vertical axis (from −180° to 180°).
- Dimensions
- Width and length in meters.
Keep image proportionsmakes sure the plan is not distorted. - Appearance
Opacityfrom 5% to 100%. 85% by default.- Header
- The eye icon hides the underlay, the padlock locks it. The ⋯ menu has
Delete underlay.
Locking and tracing
A new underlay is locked right away and works like tracing paper: you cannot click or move it in the scene, so it does not get in the way of drawing. The Line, Rectangle and Circle tools draw on the floor above it.
- To move the underlay, unlock it with the padlock in the inspector header.
- Drag the underlay across the floor with the Pointer tool or type the X and Z position.
- Lock the underlay again before you start tracing.
You can select a locked underlay from the Scene Objects list (⌘/Ctrl + 6), in the Underlays and Dimensions category.
Showing and hiding
When the project has an underlay, a layer toggle with an image icon (Show underlay / Hide underlay) appears in the top bar next to the Draft / Standard / Photo modes. It toggles all underlays at once.
