StageDesigner

DMX fixture mode and channel table

How to change the DMX mode in the fixture inspector, check the address and channel functions, and where the channel layout comes from.

2 min read
Documentation contents ▾

The inspector of a selected fixture has a DMX section. The section summary shows the address and channel count, e.g. "1.101 · 24 ch", and "No DMX" for fixtures without control.

Changing the mode

  1. Select the fixture in the scene.
  2. In the inspector, open the DMX section.
  3. In the Mode field, choose a mode. Each list item shows the channel count, e.g. "Extended · 34 ch".
  4. If the fixture already has an address in the patch and the new mode has a different channel count, the issue "Patch has X ch, mode Y ch" appears with a Recalculate addresses button.

A fixture with a single mode shows it as a read-only value. Changing the mode is a single undo step.

Address and line

The Address row shows the range in console notation, e.g. "1.101–1.124", with the line and universe below. A manually set address has a Manual badge. Before DMX is planned, you see "Address after DMX planning". The Show in channel map action opens the DMX map on the fixture's universe with its block selected.

Channel table

The expandable Channel table has three columns: channel number in the fixture, absolute address and function. A 16-bit channel is a pair, e.g. "Pan" and "Pan fine", where the low byte comes right after the coarse channel. The colored marker next to the function shows the group:

GroupExample functions
IntensityDimmer, Shutter/Strobe
MovementPan, Tilt
ColorCyan, Magenta, Yellow, CTO, color wheel
BeamZoom, Focus, Iris, Frost, prism
GoboGobo, gobo index and rotation
PixelPixel segments, e.g. Segment 1 · Red
ControlControl/Reset, reserved
UnconfirmedChannels without a confirmed function

Where the channel layout comes from

Below the table is a footnote with the channel layout status and source (model, mode, document). Statuses:

Matches the manufacturer manual
Channel order and count from the manufacturer's manual.
Partially confirmed
Channel count confirmed, order from the protocol of a compatible model.
Approximate, check the manual
StageDesigner reference classes modeled on a specific model.
Unverified
Legacy catalog models without a confirmed manual, layout typical for the fixture type.
Approximate
Built-in lamps and models without data.
Did not find the answer?
Describe the problem and we will reply with a solution or add an article.