StageDesigner

Drawing and editing a cable by hand

How to draw a cable from port to port, correct the route of an existing cable, change its type and length, and lock the route against the planner.

3 min read
Documentation contents ▾

The planner does not have to do everything. You can draw a cable yourself, from a chosen port of one device to a port of another, with the route exactly where it lies on site. A cable drawn by hand has the origin Manual and the planner does not recalculate it.

Drawing a new cable

  1. Click Draw route (J) in the Cabling panel footer or press J. The Draw cable route bar appears above the scene.
  2. Choose the cable type from the list on the bar.
  3. Click a device. When it has several matching ports, a Start: … menu appears with the list of ports; occupied ports are marked "in use".
  4. Click the next points of the route. The cursor snaps to trusses, towers, walls, stage edges and existing routes; the hint next to the cursor tells you what it snapped to.
  5. Click the second device and choose a port in the End: … menu, or press Enter to end the cable at a free point.
  6. The cable gets a family code, e.g. D-07, and a standard length. The toast has an Undo button.

The bar shows the route length and the chosen cable as you go, e.g. "18.4 m → 25 m cable", and for longer routes the segments. If the route crosses corridors, you see the number of crossings and how many of them are on an escape route.

J
Start drawing a cable route
Enter
Finish the cable
Backspace
Undo the last point
Shift
Free segment angle
Escape
Cancel the cable in progress; a second Escape ends drawing

Editing the route of an existing cable

A selected cable has vertex handles in the scene:

Drag a handle
Move a route vertex
Alt+click a handle
Delete the vertex
Double-click a segment
Add a vertex

To redraw the whole route, use the Draw route manually action in the cable details. The bar is then titled New cable route.

Cable details

Clicking a cable in the scene or in the list in the Cables tab opens its details in the same panel. Back: All cables.

Type
List of types from the same family. Changing the type by hand marks the cable as manually set (the planner will not change its cross-section).
From / To
Cable ends with their connector. The Show button zooms the camera to the device.
Route
Route length and length with allowance.
Cable length
Auto from the planner by default. You can choose a standard length from the list or type your own; the reset button returns to the planner value.
Segments
Which standard lengths make up the cable, e.g. "50 + 10 m".
Crossings
How many cable ramps and where: circulation route, escape route, door.
Assignment
Circuit with phase and protective device, DMX line with universe, or LED port.
Notes
Free text for the cable.

Cable actions

  • Recalculate route: a new planner route (not available for a locked route).
  • Draw route manually: redraw the route from scratch.
  • Lock route: the planner will not change the route when recalculating. Unlock route removes the lock.
  • Delete cable.
Did not find the answer?
Describe the problem and we will reply with a solution or add an article.