StageDesigner

Device ports in the inspector

How to check in the inspector what is connected to each port of a device, where the cable goes and which ports are free.

2 min read
Documentation contents ▾

Every catalog device, fixture and screen in the app has physical ports: connector, direction and signal type. The Ports section in the inspector shows them together with the cables, so you can see where each cable goes without opening the Cabling panel.

Where to find the Ports section

  • Fixture: the Ports section below the DMX section (DMX input and thru, power).
  • Catalog device (console, node, distribution board, LED processor, mixer…): the Ports section with an "X of Y in use" counter in the header.

Blocks by signal type

Ports are grouped into blocks: DMX, Network, LED Data, Video, Audio, Intercom, Control, USB, Power and Connections without port. A block has a color swatch of the cable family and a "2 of 4 in use" counter. The video block lists the connector types, e.g. "Video SDI · HDMI".

  • A block with only free ports is collapsed (Port free or All free).
  • A long block shows 6 rows, the rest expands with Show all.

Port row

A row is one physical port, e.g. "DMX Out 1", "Network 2", "Power In". On the right are the cable code and length in the family color, e.g. "D-04 · 10 m". Below: where the cable goes (device and its port), and for DMX outputs also the line, e.g. "Line D2 · U2 · 12 fixtures". A free port is marked "free". A port with several cables has several rows.

Click a row
Selects the cable in the scene: the camera moves to the cable and the cable shows the signal direction animation. The Cabling panel does not open. The cable is visible even with the cable layer hidden.
Cursor button
Select device: … selects the device at the other end of the cable.

Ports and drawing a cable

When drawing a cable by hand, the app suggests ports that match the cable type and marks occupied ones "in use". If the device has no port for the chosen type, the message "… has no port for cable …" appears.

Did not find the answer?
Describe the problem and we will reply with a solution or add an article.