StageDesigner

Modules, pitch and resolution

The LED screen Inspector: screen type, pitch, module size, metrics, dimensions with curvature, brightness and the module grid. Pitch belongs to the screen, so one scene can have screens with different pixel pitches.

3 min read
Documentation contents ▾

Where the screen settings are

Select a screen in the scene and open the Inspector (the I key). You can open the same window from the screen context menu with the LED Screen Settings… command. The sections of the screen Inspector are: General, position and rotation, Dimensions, Video Source, LED Screen, Shape, Appearance and Advanced.

The General section shows the assigned source, the signal state (source resolution or No signal) and the Technical note field for your own notes, for example the processor type.

Screen type

The Screen type field takes the values LED Screen, Monitor, Projector, Projection screen and TV. The LED Screen and Shape sections appear only for LED screens. A monitor, TV or projection screen has no pitch or modules, but accepts a video source in the same way.

Pitch and modules

The LED Screen section starts with a grid of metrics: resolution px, module layout (columns × rows), size in meters, LED area, pitch and the pixel count in megapixels.

Pitch
Pixel pitch in mm. Quick presets P0.9, P1.2, P1.5, P1.9, P2.6, P2.9, P3.9, P4.8, P5.9 or any value from 0.1 to 50 mm. Default 2.6 mm.
Module width, Module height
Dimensions of one module in mm. Below the fields are Common modules: 500 × 500, 500 × 1000 and 250 × 250 mm.
Technical border
A thick frame around the screen, useful in technical drawings.

Changing the pitch recalculates the resolution and module count, but does not change the physical size, aspect ratio or assigned source. This matters for screens created from a Resolume slice: the geometry comes from the XML file, and the pitch only determines the number of LED pixels.

Dimensions, aspect ratio and curvature

The Dimensions section has a unit switch Meters or Pixels, the Width and Height fields, a Keep aspect ratio toggle and quick aspect ratios 16:9, 9:16, 4:3, 1:1, 2:5, 32:9 and 21:9.

The Curvature slider (from -180° to 180°) bends the screen into an arc. A positive value wraps around the audience (concave screen), a negative value bends it outward (convex). The arc length equals the screen width, so the module count does not change.

Screen appearance

Screen brightness
From 0 to 200%. Affects only the visualization.
Module view
Technical shows the module grid, Presentation gives a clean surface. In presentation mode the client always sees the surface without the grid.
Grid intensity, Grid color
Appearance of the module grid lines in the technical view.
Simulate gaps between modules
Draws narrow gaps between modules.
Show screen outline, Identification color
A frame and color that tell screens apart in the scene and on the plan.

A quick module grid toggle is also in the context menu: Show module grid and Hide module grid.

LED pixels in Photo mode

In Photo quality, the LED Pixels toggle in the View Options menu on the top bar (and View → Image quality → LED Pixels) draws the diodes according to the screen pitch. You see the effect when you move the camera close to the screen. In Draft and Standard modes the option is unavailable.

Image crop

In the Advanced section, the Image crop group shows only part of a shared image on the screen, for example one Resolume output spread across several screens. Turn on Crop part of image and enter X, Y, Width, Height in source pixels. Match aspect ratio sets the screen aspect ratio to match the crop, and Full image restores the full frame.

Did not find the answer?
Describe the problem and we will reply with a solution or add an article.