StageDesigner

Placing fixtures: truss, stand, floor

The truss magnet while dragging, a label with the truss load, stands with load capacity and ballast checks, detaching, and quickly placing many fixtures.

3 min read
Documentation contents ▾

Fixture on a truss

Drag a fixture from the Lighting panel over a truss. When the cursor gets close to a run, the magnet pulls the fixture to the bottom chord: the clamp sits on the tube and the fixture hangs below it. Next to the cursor a label shows the run name, the position and the truss load after the fixture is added.

  • Along the run, the fixture snaps every 0.25 m, to nodes and to the middle of the span. The label says, for example, mid-span or at node with the distance from the node.
  • When the load exceeds the capacity, the preview changes to a warning color.
  • The magnet also works when you move a fixture with the gizmo. Moving the cursor further away from the run unclips the fixture.
Alt (on drop)
No magnet: the fixture lands where the cursor is
Shift (on drop)
No 0.25 m grid along the run
LED screen 520 kg · 4 × spot 36 kg86 %4.1 kN4.1 kN< 70 %70–90 %> 90 %
Truss in the editor with load utilization colors and support reactions. The fixtures on the truss are included in the load calculations.

The weight of the fixture with its rigging goes into the structure statics. See Structure loads and Structure wizard.

Fixture on a stand

A hanging fixture dropped on the floor shows the Place on a stand … m? bubble:

Height
1.5, 2, 2.5, 3, 3.5 or 4 m.
Type
T-bar stand or Crank-up tower.
description below the fields
Stand class name, load relative to the allowed load (80% of capacity), required ballast in kg or an overload warning.
Always place on a stand
Further fixtures dropped on the floor go straight onto a stand with the last settings.

Place on stand creates a stand with the fixture on top, Leave on floor closes the bubble. You can also put a fixture on a stand later with the Place on Stand… command in the context menu.

The app checks stand capacity and stability with conservative assumptions: imperfection, the reaction from moving head movement and accidental bumps. It converts missing stability into ballast, for example sandbags on the legs.

Detaching

The Detach from structure command in the context menu takes the fixture off the truss or stand and puts it on the floor below its previous position. It is one undo step. The command also works for several selected fixtures at once.

Many fixtures at once

Several ways to create rows of fixtures:

  • Distribute fixtures on truss in the venue layout plan: you choose the run, the model and the count or spacing. Described in the article Quick lighting sets.
  • Copy series: move a fixture while holding Alt, release, type the number of copies and press Enter. Typing /number divides the segment into equal intervals. Details in the article Move, rotate and scale.
  • Align and distribute (Edit menu or context menu): Distribute horizontally, Distribute in depth, Distribute vertically and alignment to edges.
  • Mirror: Mirror across stage axis creates a mirrored copy, for example for the other side of the side lighting.

The Add fixture command in the context menu of an empty part of the scene inserts a fixture at the clicked spot. Turn on light and Turn off light in the fixture context menu switch it on or off without changing its settings.

Did not find the answer?
Describe the problem and we will reply with a solution or add an article.